中文 英文

WELCOME 201 | 304 | 316 round hole stainless steel punching plate stainless steel punching mesh plate Zhenjiang Jinhuasheng stainless steel

10 Years Focus on Brand GuaranteeStainless steel products preferred Enterprises

Hotline:18852803956

当前位置:201 | 304 | 316 round hole stainless steel punching plate stainless steel punching mesh plate Zhenjiang Jinhuasheng stainless steel > Machining > Punching, embossing, stamping

    Stainless steel embossing

    Stainless steel embossing board is a place where concave and convex patterns are applied on the surface of the steel plate to require smoothness and ornamentality. The work rolls of embossing rolling are usually processed with corrosive liquids. The depth of concave and convex on the plate varies from pattern to pattern, which is about 20-30 microns. The main materials are stainless steel plates such as 2001, 202, 304, 316, etc. The general sizes are 1000 * 2000 mm, 1219 * 2438 mm, 1219 * 3048 mm. They can be opened indefinitely or rolled and embossed with thickness of 0.3 mm~2.0 mm. Generally speaking, the use of stainless steel embossed metal decorative pillars, is composed of skeleton, base plate and decorative panel three parts of the skeleton has two kinds of wood structure and steel structure. Wood structure skeleton is made of square wood, mainly used for pasting various colored stainless steel decorative materials. The steel structure skeleton is welded by angle steel or connected by screw. This kind of structure is used for decorative plate pasted with aluminium alloy plate. Now take concrete square column wrapped cylinder as an example, simply say the method of skeleton: firstly, the vertical skeleton is positioned by embedded parts, the connection between the horizontal and vertical skeleton and the fixing of the skeleton support and the column, the diameter of the circular wrapped column needs to be determined. The function of base slab is to increase the stiffness of column skeleton and facilitate the laying of decorative panels. It is generally made of plywood, woodworking board or density board, and the base plate is directly fixed on the skeleton with iron screw or screw. The base plate must have a smooth surface and a high dimensional accuracy to ensure the installation quality of the decorative surface of the stainless steel plate, which requires a higher requirement for the occasion where the cylinder is wrapped. Coloured stainless steel decorative panel is installed on the decorative material of the stainless steel plate. Usually, two ways of gluing and pinning are used, which is not suitable for welding. Because the high temperature of welding will destroy the colored film on its surface, and ultimately affect its beauty; especially the color stainless steel mirror panel, the surface is mirror, if it is a single color, then welding will leave indelible stains, it will lose the overall decorative effect; so the use of this material decoration application of welding method It's relatively few. The adhesive method is the most widely used because of its simple operation. The nailing method is convenient and firm to install, but the decorative surface will also be affected. No matter which installation method is adopted, the plate must be cut accurately.

    Products 产品中心
    Contact 联系我们
    全国咨询热线:18852803956
    Zhenjiang Jin Huasheng stainless steel co., LTD
    - zhenjiang factory
    Hotline: 0511-80857836 0511-88086119
    Phone number: 18852803956 18852803955
    Consulting QQ: 3131507619
    Fax: 0511-80857837
    - wuxi sales company
    Hotline: 0510-66927617
    Mobile phone number: 13182066718
    Fax: 0510-66927618
    Company address: wuxi xishan district Oriental steel city second phase of C5-330